COLT SAA and clone repair a/o modification prices.

  • Colt SAA's, clones, cap and balls, Remingtons, etc..................................................................................$295
  • Ruger Vaquero, New Vaquero and Blackhawks, etc., includes Wolff springs and the same treatment.......$275
  • Reream Colt .44-40 cyl to cure inability to fully chamber rounds easily (fairly common problem)................$75
  • Install a new solid 1st gen. firing pin, cone or concave, parts included.......................................................$95
  • Install a "new style" 2nd and 3rd generation "floating" firing pin, parts included (if they can be located!)....$95
  • Hammer cams installed in undamaged hammer, part included...................................................................$95
  • Hammer roller installed, some have worn flat a/o seized, parts included....................................................$75
  • Replace an early rising (worn/cracked leg) or broken bolt and re-time (includes part)................................$195
  • Replace and fit a new hand assembly and retime (includes part)................................................................$195
  • Test fire and turn barrel for adjusting windage (point of impact), ammo included.....................................$150
  • Cut forcing cone to 11ยบ and I recommend this on any and all revolvers, period. Tightens group size..........$75
  • Weld and recut broken hammer notches, one or all three notches. Refit back into gun and retime (my welder is great but he's not a gunsmith). Welds are TIG and A2 tool steel is used. Price includes me fitting back into gun and I have to say, I highly, strongly, insist actually, having an action job done along with this repair to keep it from ever happening again (I wont do it otherwise)...................................................................................$245
  • Weld up damaged trigger tip (if needed) OR, fit and time a new trigger.....................................................$245
  • Install/fit your cylinder to frame, any generation (gets rid of end-shake) includes new bushing...............$175
  • Install/fit a new barrel to frame (front sight straight up) does not include barrel, does not include setting barrel back one thread. You will probably want me to test fire and adjust POI @ $150 more....................$150
  • Set back barrel (and ejector rod housing) one thread to fix bad (large) bbl/cyl gaps, frt site straight up....$250