Refinishing Services
Some things are "up and running", some things aren't. The following picture is of the damp box I just built. It's for the rust bluing and browning that I do. It's a bit more high-tech than a guy needs, but what the heck!
Anyway........all coming soon; modern hot (caustic) bluing, nitre bluing, fire bluing of screws or Colt S.A.A. Barrels, backstraps and trigger guards if you might so be inclined, "real" barrel (rust) browning, rust bluing, and bone/charcoal color case hardening also!! Just like the manufacturers USED to do back in the 1800's!!! So keep your eyes on this website and when I'm ready, it'll be posted here. And of course I'll "experiment" on my own guns and Mike Venturino's FIRST, and put pictures up here for you to see so YOU can decide! And then when I'M confident I'll put up some price charts and you can "have at it"!
I just RUST BLUED the barrel and magazine tube for a 1st year production 1887 Winchester 12 ga. riot gun I own that I am restoring. They turned out SWEET! Check 'em out.............
And...........
The bone/charcoal CASE COLORING! Pictured below are my FIRST SAMPLES. I color cased this gun with 100% bone and did the new hot blue also. More guns (and pics) to follow. And then soon, a price list!
Looks a lot better than the original Armi San Marco job!
|
| Fire-Blue one set of BLUED Colt SAA screws, sent to me seperate, or while I have the gun here for other work. | $75.00 |
| Fire-Blue Colt SAA screws, PRE-POLISHED by customer, sent to me seperately | $50.00 |
| Fire-Blue NICKELED Colt SAA screws, includes stripping the nickel and polishing. Looks SHARP! (See picture) | $100 |
| Nitre Blue COMPLETE SAA Colt or clone, includes barrel, cylinder, base pin, trigger guard, backstrap, screws, trigger, and all polishing. | N/A yet |
Nickel SAA Peacemaker Centenial with EXTRA fancy grips and Fire Blued screws.
Note to all you AK and other Russian weapon owners;
I now have two sets of metal stamp sets in CYRILLIC (Russian) alphabet, block style (sans serif)! I have both 2mm and 4mm letters and numbers sets, direct from Russia. So if you have a gun (or anything for that matter) that needs Russky words or letters stamped in them, contact me. I'm sure we can work something inexpensive out. Just remember, it will be very difficult if not impossible to stamp into sheetmetal without it bending!